Last Updated: October 27, 2026
Quick Summary
Before you search for sprinkler repair near me, check the controller and water supply first. Many dead-system calls trace back to a tripped breaker, a closed backflow valve, or a rain sensor holding the system off. If all three check out and zones still won't run, it's time for a pro.
- A cracked head, clogged nozzle, or tilted riser causes most geysers and dry patches.
- Test the solenoid first when a sprinkler zone is not working.
- Replace backup batteries and reset the clock after an outage.
- Metro Automated Sprinklers has over 30 years of expertise and offers a 5-year warranty.
- Service covers Canton, Plymouth, Northville, Livonia, and nearby Southeast Michigan cities.
Table of Contents
- Sprinkler Repair Near Me: What to Check Before You Call
- Sprinkler Head Repair and Sprinkler System Leak Detection Basics
- Sprinkler Zone Not Working? Sprinkler Controller Troubleshooting Tips
- Frequently Asked Questions
Sprinkler Repair Near Me: What to Check Before You Call
If you're searching for sprinkler repair near me, check the controller and water supply first. Many "dead system" calls trace back to a tripped breaker, a closed backflow valve, or a rain sensor holding the system off.
Confirm the controller has power, the water valve is open, and the rain sensor isn't overriding the schedule. If all three check out and zones still won't run, it's time for a pro. Once you've decided to call, our contact Us page has the details to reach the local sprinkler repair team.
When you call, ask whether the company is licensed and insured and how they handle estimates on larger repairs. Our guide on how to choose a sprinkler system contractor walks through vetting a local company before you hire. Review our sprinkler system repair service for Canton, Plymouth, Northville, and Livonia.
| Symptom | Likely Cause | DIY Check | Call a Pro When |
|---|---|---|---|
| Nothing runs | Power or water off | Breaker, valve, rain sensor | All three are fine |
| One zone dead | Bad solenoid or valve | Swap solenoid with a working zone | Valve body is cracked |
| Low pressure | Leak or clogged head | Inspect heads for debris | Leak is underground |
| Water pooling | Broken pipe or fitting | Check head and riser | Soil stays soaked for days |
Sprinkler Head Repair and Sprinkler System Leak Detection Basics
Sprinkler head repair is usually the cheapest fix. A cracked head, clogged nozzle, or tilted riser causes most geysers and dry patches. Unscrew the head, flush the line, and swap in a matching head from the same brand, mixing brands on one zone throws off pressure and coverage.
Leak detection is different: a soggy patch that never dries, a jump in the water bill, or a zone that loses pressure all point to a line leak. Our lawn sprinkler services cover head repair and leak detection in Canton, Plymouth, Northville, Livonia, and nearby Southeast Michigan cities. Digging blindly can nick a lateral line or control wire, turning a small repair into a full trench.
Sprinkler Zone Not Working? Sprinkler Controller Troubleshooting Tips
When a sprinkler zone is not working, test the solenoid first. A working solenoid clicks faintly and reads continuity on a multimeter; no click and no reading means it's dead.
For sprinkler controller troubleshooting, replace backup batteries and reset the clock after an outage, check the rain sensor isn't stuck "off," test each zone manually, look for a blown fuse or tripped breaker, and confirm valve-box wire connections are dry and tight.
If the controller powers on but no zone responds, the problem is usually wiring or the valve itself. If troubleshooting points to a system that needs restarting or checking, see our sprinkler startup service for Canton, Plymouth, Northville, and Livonia.
A dead zone in July usually means a cracked head or failed solenoid, and both get worse the longer they sit. Metro Automated Sprinklers has over 30 years of expertise, uses Rainbird and Hunter components, offers a 5-year warranty and financing, and provides Rid-O-Rust products to help prevent rust stains. Get started with Metro Automated Sprinklers and get your zones running before the next dry stretch.
Frequently Asked Questions
How do I find a reliable sprinkler repair service near me?
Ask about warranties, response times, and whether the company offers free estimates. Metro Automated Sprinklers has over 30 years of expertise, uses top-tier components from brands like Rainbird and Hunter, and offers a 5-year warranty.
Why is one sprinkler zone not working?
A single zone that stops working often points to a faulty valve, a tripped solenoid, a wiring issue, or a controller setting problem. Start by checking the controller for that zone, then inspect the valve box for debris or loose connections. If the zone still fails, a professional can test the solenoid and wiring.
How can I tell if my sprinkler system has a leak?
Watch for soggy patches, unusually high water bills, low water pressure, or a zone that sprays weakly. A leaking valve or broken lateral line often causes these signs. Turn off the system and check the water meter; if it still moves, water is escaping somewhere.
